| Ham Radio Deals https://hamradiodeals.co.uk/forums/ |
|
| Rotator rotator virgin https://hamradiodeals.co.uk/forums/viewtopic.php?f=43&t=65084 |
Page 1 of 1 |
| Author: | MM0JTV [ Wed Mar 18, 2015 7:41 pm ] |
| Post subject: | Rotator rotator virgin |
I havea yaesu 250 rotator What is the best way to calibrate the controler to the antenna ? The controller only seems to activate motion 270 degrees on the dial and sometimes when it gets to the determined degree it becomes live again and starts to turn back and forward a few degrees Thanks for any advice |
|
| Author: | M0GVZ [ Wed Mar 18, 2015 10:55 pm ] |
| Post subject: | Re: Rotator rotator virgin |
Assuming there is no fault with the position potentiometer in the rotator itself... Not sure what controller you're using but on my Kenpro 400 which became the Yaesu G450, you rotate it fully counter clockwise and manually adjust the needle to point to 0. You then wind it fully clockwise and use the potentiometer on the back to rotate the needle to about 10 degrees. |
|
| Author: | M0WYZ [ Thu Mar 19, 2015 8:53 am ] |
| Post subject: | Re: Rotator rotator virgin |
maybe this is a help ,not had a 250 but lots of other yeasu rotators & being planetary driven they do move back forth quite abit . http://ea4eoz.blogspot.co.uk/2012/09/te ... esu-g.html |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|