| Ham Radio Deals https://hamradiodeals.co.uk/forums/ |
|
| ACOM 04 ATU reviews https://hamradiodeals.co.uk/forums/viewtopic.php?f=43&t=134987 |
Page 1 of 1 |
| Author: | G4HTZ [ Sun Dec 03, 2023 8:29 am ] |
| Post subject: | ACOM 04 ATU reviews |
Looking for any reviews or opinions from people who have actually used the ACOM 04AT remote ATU …seen the EHAM ones I know it can only be used with a Acom solid state amp . Looking to match inverted L across 160 80 60 40 …plus other antennas at times Any information please to here or direct via pm or email please Thanks Steve |
|
| Author: | G0WYD [ Thu Feb 01, 2024 8:12 pm ] |
| Post subject: | Re: ACOM 04 ATU reviews |
Running mine into the following.driven by a Acom 1200s with a Icom 7700 or the 7610. Ant, 1. Home brew 8010 endfed, tunes all ands no bother. Ant 2. 40/20/15/10 high gain rotary dipole. Tunes them top to bottom. Ant 3. Home made 12/10 mtr coax vertical, tunes it across all of the 12/10 and 50 MHz bands no bother, Ant 4. May well be the revamped g3txq hex if i can find time and better health to do it/ keep it, and it will tune it no bother as well. Mine is the older one NOT the new black box one that sits in the radio room, and they can be used up to 330 feet from the Amp as it uses 26 volts to control the tuner down the coax from the amp.(clever) Touch wood mine works a treat.. Bob. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|